модем USR и mgetty.
- From
- Dmitry Pankov (2:5022/81.81)
- To
- Andrey Slusar
- Date
- 2005-06-16T22:48:32Z
- Area
- RU.UNIX.FTN
Привет, Andrey!
16.06.2005 (1:53) Andrey Slusar писал Dmitry Pankov:
DP>> Про это в info mgetty было что-то написано. Надо примерно так сделать:
DP>> init-chat "" ATZ OK AT OK
AS> Во, то что надо. Так работает. Странные модемы эти USRы.
Да вроде ничего. У меня тоже 5630.
AS> Кстати, а цитату из info mgetty можешь показать? Я что-то не нашел.
Запросто:
=== Cut ===
* On USR and some ELSA Modems, it has occasionally been reported
that the initialization phase runs through fine, but incoming
`RING' messages are not recognized, and mgetty complains about
`junk on the line'. In all those cases, it were baud rate
problems. The modem was initialized with an init-sequence of `""
ATZ OK' only. Problem with this is, after ATZ, the modem changes
to the DTE baud rate that the last AT&W command was sent with. If
that baud rate differs from the `mgetty' port speed, a RING won't
be detected. Fix is easy: send another `AT' command after the
`ATZ'. For example, make the init sequence `"" ATZ OK AT OK'. The
second `AT' command will set the modem back to the mgetty port
speed.
=== Cut ===
--
С наилучшими пожеланиями, Dmitry
--- The Bat! (v3.0) Professional
* Origin: Говорят, в FIDO какой-то All появился... (2:5022/81.81)
SEEN-BY: 46/50 50/203 400/814 450/186 247 1024 451/30 454/9 465/285 4646/15
SEEN-BY: 5000/5000 5001/5001 5002/50 79 5003/57 5010/53 5011/13 5012/23
SEEN-BY: 5015/10 5019/31 5020/52 154 175 400 545 715 758 830 937 1523 1604
SEEN-BY: 5020/2020 2142 2238 4441 5021/29 5022/38 71 81 128 5025/3 750 5026/45
SEEN-BY: 5027/16 5030/49 115 556 966 1063 1900 5031/70 5035/38 5036/34 5042/13
SEEN-BY: 5049/50 5054/1 8 9 18 37 45 63 67 81 5059/37 5061/120 5062/1 10
SEEN-BY: 5063/3 5067/2 5069/7 5070/1222 5079/23 5080/80 1003 5083/21 5085/13
SEEN-BY: 5090/108 113 5092/1 5095/20 5096/18 5099/11 6000/12 254 6001/10
SEEN-BY: 6090/1
PATH: 5022/81 128 5020/4441 545 5054/1 37