Засада...

From

Andrey Ostanovsky (2:5030/1957)

To

Serge V.Panchenko

Date

2007-02-28T13:54:36Z

Area

RU.UNIX.SOLARIS

Hello Serge!

27 Feb 07 19:45, you wrote to All:

 SP> Есть сервер V490. На нём установлена Solaris9. Пароль рута есть,
 SP> физический доступ к серверу есть. Проблема в том, что не могу
 SP> подключиться к ALOM через SERIAL MGT порт - пароль admin'а утерян.

 SP> Есть варианты?

Мне саппортеры вот так советовали. Что там при этом еще снесется - не знаю.

*1.* Make a connection to the ALOM serial management port.

*2.* Power cycle the system by unplugging the server's power supplies, waiting
several seconds and then plugging the power supplies back in.

*3.* You should see the ALOM booting on the serial management console. Hit "Esc"
(the Escape key) during the ALOM boot, before or at the point: "Return to Boot
Monitor for Handshake"

This will cause the system to produce the message: "Return to Boot Monitor for
Handshake ESC keypress detected."

*4.* ALOM will now enter the "ALOM boot escape menu" and the following will be
displayed:

ALOM <ESC> Menu


e - Erase ALOM NVRAM.
m - Run POST Menu.
R - Reset ALOM.
r - Return to bootmon.
Your selection:


*5.* To clear out the existing password you must choose 'e' to erase the ALOM
NVRAM. After using the 'e' option to erase the NVRAM choose the 'r' option to
resume the ALOM boot. You will automatically be logged in as user 'admin' with
no password and no permissions. The NVRAM settings will be reset to their
factory defaults. Note that since this procedure resets the NVRAM settings to
their defaults any customization (such as the ALOM network settings) will need
to be recreated.

Andrey

--- GoldED+/BSD 1.1.5
 * Origin: PGP KeyID 2ABEC67A andrey @ ostanovsky. spb. ru (2:5030/1957)
SEEN-BY: 450/1024 5000/5000 5011/13 5012/46 5015/28 5020/400 545 2238 4441
SEEN-BY: 5021/29 5025/3 5030/1957 5035/38 5045/7 5054/1 4 8 9 28 35 37 5062/10
SEEN-BY: 5064/7 5085/13 5095/20 5096/18

PATH: 5030/1957 5020/545 5054/1 37