Re: Установка на HP Proliant DL380 G5
- From
- Victor Sudakov (2:5020/400)
- To
- "Andrey N. Oktyabrski"
- Date
- 2007-12-24T09:00:56Z
- Area
- RU.UNIX.SOLARIS
From: Victor Sudakov <vas@mpeks.tomsk.su>
Andrey N. Oktyabrski wrote:
> > При установке Solaris 10 на HP Proliant DL380 G5 инсталлятор говорит,
> > что "no disks found". Как поставить?
> >
> > FreeBSD и Windows нормально видят диски (тома его встроенного RAID и
> > DVD-ROM).
> А что говорит фришный pciconf -lv об этом встроенном raid'e?
См. ниже
hostb0@pci0:0:0:0: class=0x060000 card=0x31fd103c chip=0x25d88086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x25e28086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib7@pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x25e38086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib8@pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x25f88086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib9@pci0:0:5:0: class=0x060400 card=0x00000000 chip=0x25e58086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib10@pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x25f98086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib11@pci0:0:7:0: class=0x060400 card=0x00000000 chip=0x25e78086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
hostb1@pci0:0:16:0: class=0x060000 card=0x31fd103c chip=0x25f08086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:16:1: class=0x060000 card=0x31fd103c chip=0x25f08086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:16:2: class=0x060000 card=0x31fd103c chip=0x25f08086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:17:0: class=0x060000 card=0x31fd103c chip=0x25f18086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb5@pci0:0:19:0: class=0x060000 card=0x31fd103c chip=0x25f38086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb6@pci0:0:21:0: class=0x060000 card=0x31fd103c chip=0x25f58086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb7@pci0:0:22:0: class=0x060000 card=0x31fd103c chip=0x25f68086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
pcib12@pci0:0:28:0: class=0x060400 card=0x00000000 chip=0x26908086 rev=0x09 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib14@pci0:0:28:1: class=0x060400 card=0x00000000 chip=0x26928086 rev=0x09 hdr=0x01
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x31fe103c chip=0x26888086 rev=0x09 hdr=0x00
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x31fe103c chip=0x26898086 rev=0x09 hdr=0x00
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x31fe103c chip=0x268a8086 rev=0x09 hdr=0x00
class = serial bus
subclass = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x31fe103c chip=0x268b8086 rev=0x09 hdr=0x00
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x31fe103c chip=0x268c8086 rev=0x09 hdr=0x00
class = serial bus
subclass = USB
pcib16@pci0:0:30:0: class=0x060401 card=0x00000000 chip=0x244e8086 rev=0xd9 hdr=0x01
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x26708086 rev=0x09 hdr=0x00
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x31fe103c chip=0x269e8086 rev=0x09 hdr=0x00
class = mass storage
subclass = ATA
pcib2@pci0:9:0:0: class=0x060400 card=0x00000000 chip=0x35008086 rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib6@pci0:9:0:3: class=0x060400 card=0x00000000 chip=0x350c8086 rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib3@pci0:10:0:0: class=0x060400 card=0x00000000 chip=0x35108086 rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib4@pci0:10:1:0: class=0x060400 card=0x00000000 chip=0x35148086 rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib5@pci0:10:2:0: class=0x060400 card=0x00000000 chip=0x35188086 rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
ciss0@pci0:6:0:0: class=0x010400 card=0x3234103c chip=0x3230103c rev=0x03 hdr=0x00
class = mass storage
subclass = RAID
pcib13@pci0:2:0:0: class=0x060400 card=0x00000000 chip=0x01031166 rev=0xc3 hdr=0x01
class = bridge
subclass = PCI-PCI
bce0@pci0:3:0:0: class=0x020000 card=0x7038103c chip=0x164c14e4 rev=0x12 hdr=0x00
class = network
subclass = ethernet
pcib15@pci0:4:0:0: class=0x060400 card=0x00000000 chip=0x01031166 rev=0xc3 hdr=0x01
class = bridge
subclass = PCI-PCI
bce1@pci0:5:0:0: class=0x020000 card=0x7038103c chip=0x164c14e4 rev=0x12 hdr=0x00
class = network
subclass = ethernet
vgapci0@pci0:1:3:0: class=0x030000 card=0x31fb103c chip=0x515e1002 rev=0x02 hdr=0x00
class = display
subclass = VGA
none0@pci0:1:4:0: class=0x088000 card=0x3305103c chip=0xb2030e11 rev=0x03 hdr=0x00
class = base peripheral
none1@pci0:1:4:2: class=0x088000 card=0x3305103c chip=0xb2040e11 rev=0x03 hdr=0x00
class = base peripheral
uhci4@pci0:1:4:4: class=0x0c0300 card=0x3305103c chip=0x3300103c rev=0x00 hdr=0x00
class = serial bus
subclass = USB
none2@pci0:1:4:6: class=0x0c0701 card=0x3305103c chip=0x3302103c rev=0x00 hdr=0x00
class = serial bus
> наподобие этого:
Нет, про Adaptec ни слова.
> И как можно точнее модель контроллера хорошо бы знать...
Вот ещё dmesg с этого же сервера:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA4 #0: Sun Dec 2 16:34:41 UTC 2007
root@myers.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.12-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 6424039424 (6126 MB)
avail memory = 6199693312 (5912 MB)
ACPI APIC Table: <HP 00000083>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <HP P56> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 929092906000929
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 929092906000929
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 929092906000929
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 929092906000929
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci9: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci10
pci11: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci10
pci14: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci10
pci17: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.3 on pci9
pci18: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci6: <ACPI PCI bus> on pcib7
ciss0: <HP Smart Array P400> port 0x4000-0x40ff mem 0xfde00000-0xfdefffff,0xfddf0000-0xfddf0fff irq 18 at device 0.0 on pci6
ciss0: [ITHREAD]
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci19: <ACPI PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 5.0 on pci0
pci22: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci23: <ACPI PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 7.0 on pci0
pci26: <PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib12
pcib13: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib13
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce0: Ethernet address: 00:1a:4b:ad:c6:f4
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MFW MSI )
pcib14: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib14
pcib15: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib15
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xfa000000-0xfbffffff irq 17 at device 0.0 on pci5
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce1: Ethernet address: 00:1a:4b:ad:c6:f2
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MFW MSI )
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1020-0x103f irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1040-0x105f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1060-0x107f irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf7df0000-0xf7df03ff irq 16 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib16
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xf7ff0000-0xf7ffffff irq 23 at device 3.0 on pci1
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci1
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
pci1: <serial bus> at device 4.6 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xe6000-0xe7fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: [FILTER]
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <vendor 0x15ca USB Optical Mouse, class 0/0, rev 2.00/5.12, addr 2> on uhub3
ums0: 3 buttons and Z dir.
ukbd0: <Chicony USB-PS/2 Combo Keyboard, class 0/0, rev 2.00/1.44, addr 3> on uhub3
kbd2 at ukbd0
uhid0: <Chicony USB-PS/2 Combo Keyboard, class 0/0, rev 2.00/1.44, addr 3> on uhub3
ukbd1: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
kbd3 at ukbd1
ums1: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
ums1: X report 0x0002 not supported
device_attach: ums1 attach returned 6
uhub6: <HP Virtual Hub, class 9/0, rev 1.10/0.01, addr 3> on uhub5
uhub6: 7 ports with 7 removable, self powered
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80b7f7a0
acd0: DVDROM <HL-DT-STDVD-ROM GDR-8084N/3.00> at ata0-master UDMA33
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_LiveFS.
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
da0 at ciss0 bus 0 target 1 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-5 device
da0: 135.168MB/s transfers
da0: 34699MB (71065440 512 byte sectors: 255H 32S/T 8709C)
Trying to mount root from ufs:/dev/md0
--
Victor Sudakov, VAS4-RIPE, VAS47-RIPN
2:5005/49@fidonet http://vas.tomsk.ru/
--- ifmail v.2.15dev5.4
* Origin: AO "Svyaztransneft", SibPTUS (2:5020/400)
SEEN-BY: 450/1024 461/640 469/999 4625/8 5000/5000 5006/1 5007/1 5010/70
SEEN-BY: 5011/13 5015/28 5019/40 5020/175 194 400 545 902 1922 2238 4441
SEEN-BY: 5021/29 5025/3 5030/1080 1957 5035/38 5036/1 5045/7 5051/15 5054/1 4
SEEN-BY: 5054/8 9 28 37 5060/88 5061/15 120 5062/10 5064/7 5066/18 5075/5
SEEN-BY: 5085/13 5093/57 5095/20 5096/18 6001/10 6009/1
PATH: 5020/400 545 5054/1 37